1 d a t a s h e e t : c l d - c t 1 1 8 3 . 0 0 0 features ? size (mm): 6.0 x 5.0 ? color and typical dominant wavelength (nm): ? red (618-630) ? amber (584-596) ? luminous intensity (mcd): ? clp6c-rkw (3550-7100) ? clp6c-akw (3550-9000) ? viewing angle: 120 degrees ? lead-free ? rohs-compliant applications ? light strip ? channel letter ? backlight cree ? plcc6 3-in-1 smd led clp6c-rkw/akw data sheet these smd leds are packaged in an industry-standard plcc6 package. these high-reliability and high-brightness leds are designed to work in a wide range of environmental conditions and are ideally suited for use in illumination applications. their wide viewing angle makes these leds ideally suited for channel-letter or general-backlighting and illumination applications. the fat-top emitting surface makes it easy for these leds to mate with light pipes. subject to change without notice. www.cree.com/ledlamps
2 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit red/amber forward current i f 3 x 80 ma peak forward current note i fp 3 x 200 ma reverse voltage v r 5 v power dissipation p d 3 x 240 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 c junction/ambient r thja 3 x 250 c/w junction/solder point r thjs 3 x 150 c/w electrostatic discharge classifcation(mil-std-883e) esd class 2 note: 1. pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics color symbol condition unit minimum typical maximum forward voltage red/amber v f i f = 50 ma v 2.4 3.0 reverse current red/amber i r v r = 5 v a 10 dominant wavelength red d i f = 3 x 50 ma nm 618 624 630 amber d i f = 3 x 50 ma nm 584 591 596 luminous intensity red i v i f = 3 x 50 ma mcd 3550 4800 amber i v i f =3 x 50 ma mcd 3550 5000 50% power angle red/amber 2? i f = 3 x 50 ma deg 120
3 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. intensity bin limit (i f = 3 x 50 ma) red (clp6c-rkw) bin code min. (mcd) max. (mcd) yb 3550 4500 z0 4500 5600 a0 5600 7100 color bin limit (i f = 3 x 50 ma) amber (clp6c-akw) bin code min. (mcd) max. (mcd) yb 3550 4500 z0 4500 5600 a0 5600 7100 b0 7100 9000 tolerance of measurement of luminous intensity is 10%. red bin code min. (nm) max. (nm) ra 618 630 amber bin code min. (nm) max. (nm) aa 584 596 tolerance of measurement of dominant wavelength is 1 nm.
4 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. order code table* red color kit number viewing angle luminous intensity (mcd) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red CLP6C-RKW-CYBA0AA3 120 3550 7100 ra 618 ra 630 red clp6c-rkw-cz0a0aa3 120 4500 7100 ra 618 ra 630 amber color kit number viewing angle luminous intensity (mcd) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber clp6c-akw-cybb0aa3 120 3550 9000 aa 584 aa 596 amber clp6c-akw-cz0b0aa3 120 4500 9000 aa 584 aa 596 notes: ? the above kit numbers represent order codes which include multiple intensity-bin and color-bin codes. only one intensity-bin code and one color-bin code will be shipped on each reel. single intensity-bin codes and single color- bin codes will not be orderable. ? please refer to the cree led lamp reliability test standards document for reliability test conditions. ? please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
5 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs f i g. 2 r e l a t i ve l u m i n o u s i n t e n s i t y v s. f o r w a r d c urr e nt fo r w a r d v o l ta g e. fi g . 1 fo r w a r d cu r r e n t v s. i f ( m a) v f( v) i f ( m a) 0 .0 0 .5 2 .0 1 .0 1 .5 2 .5 60 20 40 1 00 80 0 2 .6 1 .8 2 .2 2 .0 2 .4 2 .8 2 0 .0 40 .0 8 0 .0 60 .0 1 0 0 .0 0 .0 - 10 v s . r e v e r se v o l t a g e. f ig . 3 r e d &ye l l o w r ev e r s e c u rr e nt - 50 v r( v) - 30 - 40 - 20 - 40 i r ( u a) - 50 - 30 - 20 - 10 0 0 f i g. 6 f a r f i e l d pa tt e rn - 90 - 60 - 30 0 0 0 0 .5 1 .0 30 60 90 5 0 % p o w e r a n g l e : 1 20 a n g le i f ( m a) 0 60 20 40 1 00 80 40 20 80 60 1 00 0 t a ( c) f ig . 5 r e d & y e ll o w m ax i m u m f o r w a r d d cc u rr e nt vs a m b i e n t t e m p e r a t ur e ( t j m a x= 1 1 0 c) r t h j - a = 25 0 c /w r t h j - s= 1 5 0 c /w y el l ow r ed y e ll ow r ed ( r e l a t i v e l u m i n o u s i n t e n s i t y) ( r e l a t i v e l u m i n o u s i n t e n s i t y) f ig . 4 r e l a t i v e l u m i n o u s i n t e n s i t y vs. ( r e l a t i ve l u m i n o u s i n t e n s i t y) w a ve l e n g t h. w l ( n m) 8 0% 2 0% 40% 6 0% 0% 1 0 0% 7 00 3 00 5 00 4 00 6 00 800 900 r ed am b er the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice.
6 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye.
7 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed by ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner:
8 cld-ct1183.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. packaging ? the boxes are not water-resistant, and they must be kept away from water and moisture. ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shocks during transportation. ? the reel pack is applied in smd led. ? max 900 pcs per reel. 40% 20% 30% 10% d a ng e r ous d o no t e at d e s i cca nt ?
|
